- #Rip software for epson color stylus 3000 mac os x#
- #Rip software for epson color stylus 3000 full#
- #Rip software for epson color stylus 3000 pro#
- #Rip software for epson color stylus 3000 software#
If you use this computer then the processing power is no longer just for print jobs and that doesn't provide any advantage.
#Rip software for epson color stylus 3000 software#
The other thing I have to ask is are you intending to use the Mac that RIP software is installed on? The reason I ask is that hardware RIPs are computers that are usually physically connected to a printer and dedicated to only processing print jobs. I would check with Epson to see if they have a new version of the software for the Intel Mac's (it should say that it is written in Universal Binary).
#Rip software for epson color stylus 3000 pro#
If the software doesn't work when connected to the Intel Mac Pro but does when connected to the Power PC G4, then it may be a case of it not being compatible with the new Intel architecture. If it does then you can connect using the HP Jet Direct-Socket to see if that works.įrom what you have said it sounds like there could be a software issue rather than a network issue.
![rip software for epson color stylus 3000 rip software for epson color stylus 3000](https://www.njuskalo.hr/image-w920x690/ink-jet-printeri/epson-stylus-color-3000-akcija-slika-92985835.jpg)
Better still, see if the software supports some other protocol such as Raw (Port 9100). This can cause jobs to behave as you mention.
#Rip software for epson color stylus 3000 full#
The other thing I would try is downloading the full 10.4.8 Combo updater for Intel and PPC and run this on both Mac's respectively.Īlso, check that you have correct queue names for the LPD queue. If you boot from the disc, the service won't have started and therefore it will respond to any attempt by the system to repair it. I'm guessing the RIP software acts as a service and starts on boot. I know that you have already performed a repair permissions, but I would do it after booting from the OS X disc. The CS2 suite is not an ideal test app, unless it is only the suite you are having trouble printing from. As a test I would change the RIP software so that only the Epson printer is spooled to. The reason I ask is that I was thinking that if they were both networked then there may be an addressing issue. You also mention in your original post a HP printer jobs were switching to.
![rip software for epson color stylus 3000 rip software for epson color stylus 3000](https://cdn2.bigcommerce.com/n-arxsrf/s8bug/products/3524/images/4775/3000_-_Layers_Original_File__51464.1484442595.1280.1280.png)
Is the Epson physically connected to one Mac via USB or is it network with its own IP address? That would explain why you are using the loopback address to view the spool area of the RIP. I was thinking that you had a physical RIP, rather than it being software. I think I have a better understanding of your setup.
#Rip software for epson color stylus 3000 mac os x#
Anyone have any thoughts? Thanks!!!ĭual 1 GHz PowerPC G4 & 2x2.66 GHz Dual-Core Intel Xeon 10.4.8 Mac OS X (10.4.7) I run a business and I must print this job.
![rip software for epson color stylus 3000 rip software for epson color stylus 3000](http://files.support.epson.com/htmldocs/pho22_/pho22_f1/images/21u_ng.gif)
I have received no help from Epson whatsoever. When I launch the RIP software, sometimes-but not every time-I immediately get a PS server error that says: EPSON The files will all print to my other printers as well, but I need to print them to the 2200 with the RIP for best quality.
![rip software for epson color stylus 3000 rip software for epson color stylus 3000](https://www.in-vendita.it/sh-img/139419712_10221424875244391_1020490239579609669_o_stampante%2B3000%2Bepson%2Bstylus%2Bcolor.jpg)
All the files I'm trying to print will print directly to the 2200, just not through the RIP software, so I know it's communicating. I've uninstalled and reinstalled both the RIP software and the 2200 in printer setup utility and on both systems. I gave up, unplugged it, disconnected the USB, plugged it all back in, repaired permissions to both computers, restarted and then tried to print again and then:ī) In the printer list the job shows up as first printing to the RIP (127.0.0.1) for a few seconds, then it quickly bounces to the next printer on my list, an HP laser jet?!!! When it does send to the printer, it stops the job, putting it on hold and when I click start jobs, it promptly stops it again and this repeats itself going nowhere. Sometimes it times out and never even appears in the 127.0.0.1 window, and doesn't send it to the RIP. Several different things are happening when I print the job.Ī) It sends the print job to print far too quickly. I'm trying to print from Illustrator CS2. I have a Dual 1 GHz PowerPC G4 running Mac OS 10.4.7 and a new 2x2.66 GHz Dual-Core Intel Xeon running 10.4.8. I'm at my wit's end! For no apparent reason, I cannot print to my Epson Stylus Photo 2200 with my Stylus RIP Pro 2.0 PS server software from either of my 2 computers-I get the same problems from both computers.